TL Steelworks designs, fabricates and finishes bespoke internal and external steel staircases for homes, builders, architects and commercial clients across Dorset, Hampshire and the south of England. Each staircase is made to measure in our 15,000 sq ft Verwood facility and quoted individually. Call 01202 285449 to discuss yours.

What are internal and external steel staircases?

They are staircases fabricated from steel to the exact dimensions of your building, either inside a property or outside it as an access stair, fire route or feature. A steel staircase is a structural element as well as a way between floors, so it has to be strong, safe and durable while suiting the look of the building.

We make internal and external steel staircases in any configuration to suit your requirements, including:

Staircases are often paired with our steel balconies and railings, or with glass balustrade systems designed with current Building Regulations in mind.

Who are steel staircases for?

Our steel staircases are for anyone who needs a staircase that fits an existing or new structure accurately. Typical customers include:

We handle projects from a single beam to industrial-scale developments, so a single domestic staircase is very much worth our time.

How does a steel staircase project work?

A steel staircase project runs from your first call through survey, drawings and approval to fabrication, finishing and delivery, all handled by one team. This is a typical process rather than a named project:

  1. Enquiry. Call 01202 285449 or 07938 826490, or send drawings, dimensions and project details through our contact page for staircase quotes.
  2. Project brief. We establish what the staircase must do, whether it is for internal or external use, and the dimensions and finish you need.
  3. Site survey and measurement. Where needed, we survey using total stations alongside traditional measurement methods, recording existing building conditions, access restrictions, uneven surfaces and installation tolerances so the stair fits the actual structure.
  4. Drawings and detailing. Our in-house draughtsmen produce 2D and 3D fabrication drawings in Tekla Structures and Advance Steel, covering dimensions, connection details and material specifications. You approve them before manufacturing begins.
  5. Structural design and calculations. Where the work requires it, calculations are produced by our in-house engineer to support Building Control requirements, before fabrication rather than after.
  6. Material and finish selection. Material and protective coating are chosen for the environment and intended use, not appearance alone.
  7. Quotation. You receive a tailored quote covering design, materials, engineering, fabrication, finishing, delivery and installation as applicable.
  8. Fabrication and finishing. The staircase is manufactured in our purpose-built workshops and finished in our own painting facilities in Verwood.
  9. Delivery and installation coordination. Deliveries can be staggered to suit your construction programme, and our spider crane is available for safe lifting and installation.

How much do internal and external steel staircases cost?

There is no fixed price: every steel fabrication project is priced around its specific design, materials, engineering and installation requirements. Share your drawings or project details to receive a tailored quotation.

The things that affect the price of a steel staircase are:

We work on fair pricing rather than the lowest price. Call 01202 285449 for a quotation.

What is included with a TL Steelworks staircase?

Everything from measurement to delivery can be handled under one roof, so you deal with a single supplier.

Stage Handled in-house by TL Steelworks
Site survey Total stations alongside traditional measurement methods
Drawings 2D and 3D fabrication drawings in Tekla Structures and Advance Steel, approved by you before manufacture
Engineering Structural design and calculations from our in-house engineer, where the work requires them
Fabrication Purpose-built workshops at our Verwood facility
Finishing In-house painting and protective finishing
Delivery and lifting Staggered deliveries to suit your programme; spider crane for lifting and installation

Whether installation is included depends on your project and is set out in your quotation. If your architect or engineer has already produced drawings, we can work from them instead.

How do you make sure the staircase fits?

We survey first, draw second and only cut steel once you have approved the drawings. Most staircase problems begin before fabrication starts: incorrect floor-to-floor measurements, poor headroom clearance, misaligned landings, inadequate structural support and design changes after fabrication has begun. Because a steel staircase is manufactured to precise dimensions, even small planning errors affect the whole installation. Rise and going, headroom, handrails and guarding are all considered at the design stage, in line with Building Regulations.

Which areas do you cover for steel staircases?

We make every staircase in Verwood, our only base, and serve Dorset, Hampshire and the wider south of England, including Wiltshire, Somerset, Surrey and Berkshire. Larger commercial projects are assessed individually.

Each town below has its own steel staircase page:

See the towns and areas we cover for steelwork, and if your project is nearby but not listed, call 01202 285449.

Who is behind the work?

This page was prepared by the TL Steelworks Technical Team, structural steelwork and bespoke metal fabrication specialists working across structural steel, architectural metalwork, fabrication, site surveys, structural design and installation, on projects ranging from individual beams to larger commercial and industrial requirements. TL Steelworks has been an established business for over a decade.

Steel staircase questions

Can you work from my architect’s or engineer’s drawings?

Yes. We can fabricate from your architect’s or structural engineer’s drawings, or produce the drawings, detailing and calculations ourselves in-house.

Do you provide structural calculations for Building Control?

Yes, where the work requires it. Structural design and calculations are produced by our in-house engineer to support Building Control requirements, and they are dealt with before fabrication begins.

What finish should I choose for an external steel staircase?

That depends on where the staircase will be. Material and protective coating are specified for the environment and intended use, which matters most for external stairs and for coastal properties exposed to a marine environment. Finishing is carried out in our own painting facilities.

Do you take on a single domestic staircase?

Yes. Our work ranges from a single beam to industrial-scale developments, and every customer gets the same flexibility and support.

Can deliveries fit around my build programme?

Yes. Deliveries can be staggered to suit your construction programme, and help and advice is available outside normal working hours where a project needs it.

How do I get a quote?

Call 01202 285449 or 07938 826490, email tlsteels@outlook.com, or send your drawings, dimensions and project details through our steel staircase enquiry form.

How do I contact TL Steelworks?

TL Steelworks (Dorset) Ltd, Unit 2, Bessemer Close, Ebblake Ind Est, Verwood, Dorset, BH31 6AZ. Telephone 01202 285449 or 07938 826490. Email tlsteels@outlook.com.