Structural design and calculations from TL Steelworks are produced by our in-house engineer at our 15,000 sq ft facility in Verwood, Dorset, to support Building Control requirements for steel beams, frames and bespoke steelwork. Homeowners, builders, architects and developers across Dorset, Hampshire and the wider south get the calculations, drawings and fabricated steel from one team.
We design and make the steel under one roof, at Unit 2, Bessemer Close, Ebblake Industrial Estate, Verwood, Dorset BH31 6AZ, so the calculations are considered before fabrication rather than after components are made. Call 01202 285449 or 07938 826490 to talk through your project.
What are structural design and calculations?
Structural design and calculations set out what size and type of steel a job needs, how it connects to the existing structure and how it carries the loads, so that the work can be checked by Building Control. At TL Steelworks they are provided by our in-house engineer and are available wherever a project requires them.
They are typically needed when you are:
- removing a load-bearing wall and fitting a steel beam
- building an extension or converting a loft
- carrying out a renovation or structural alteration
- adding a steel staircase, balcony or other structural metalwork
- running a residential, commercial or industrial development
Who needs structural calculations from a steel fabricator?
Anyone whose steelwork has to satisfy Building Control and fit an existing building accurately. We work with homeowners and self-builders, builders and main contractors, architects and structural engineers, property developers, and commercial and industrial clients, on projects ranging from a single beam to industrial-scale developments.
If you already have an engineer, we can work from their approved drawings and calculations instead. Either way, one team is responsible from measurement through to delivery.
How does the structural design process work?
The process runs from your first enquiry to delivered steel, with the calculations settled before anything is cut. A typical project follows these steps:
- Enquiry: call 01202 285449 or 07938 826490, or send drawings, dimensions and project details through our contact page.
- Project brief: we establish what is being made, what it must do, whether it is structural, decorative or safety-related, internal or external, and the dimensions and finish required.
- Site survey: where needed, we survey using total stations alongside traditional measurement methods, recording existing conditions, access restrictions, uneven surfaces and installation tolerances.
- Structural design and calculations: where the work requires it, our in-house engineer produces the calculations to support Building Control requirements.
- Drawings and detailing: 2D and 3D fabrication drawings are produced in-house in Tekla Structures and Advance Steel, covering dimensions, connection details and material specifications, and you approve them before manufacturing begins.
- Material and finish: material and protective coating are chosen for the environment and intended use.
- Quotation: a tailored quote covers design, materials, engineering, fabrication, finishing, delivery and installation as applicable.
- Fabrication, finishing and delivery: the steel is made in our purpose-built workshops, finished in our painting facilities and delivered, with staggered deliveries arranged to suit your construction programme.
What is included with structural design and calculations?
What is included depends on what your project needs, and the quotation sets it out. Handled in-house by TL Steelworks:
- structural design and calculations from our in-house engineer, where the work requires them
- site surveys using total stations and traditional measurement methods
- 2D and 3D drawings in Tekla Structures and Advance Steel, approved by you before manufacture
- fabrication in our purpose-built workshops, with in-house painting and protective finishing
- delivery, collection and installation coordination, including a spider crane for safe lifting
How much do structural design and calculations cost?
There is no fixed price list. Every project is quoted individually based on design complexity, steel type and quantity, fabrication requirements, engineering and calculations, site surveys, protective finishes, delivery and installation. Share your drawings or project details to receive a tailored quotation. We price fairly for the work involved rather than competing on the lowest figure.
Where do we provide structural design and calculations?
We are based in Verwood, our only location, and work across Dorset, Hampshire and the wider south of England. Choose your area for local details:
- Structural design and calculations in Bournemouth
- Structural design and calculations in Poole
- Structural design and calculations in Christchurch
- Structural design and calculations in Ferndown
- Structural design and calculations in Wimborne
- Structural design and calculations in Ringwood
- Structural design and calculations in Salisbury
- Structural design and calculations in Southampton
See every town we serve on our areas we cover page. If your project is nearby but not listed, call 01202 285449.
Which council handles Building Control in Verwood?
Dorset Council handles building control for Verwood, including our own base at BH31. That is a different authority from BCP Council, which covers Bournemouth, Christchurch and Poole, so if you have worked across the boundary before, do not assume the application route is the same. The structural requirement itself is national: Approved Document A covers loadings and the construction of structural elements, whichever council is inspecting. Our calculations are prepared to support Building Control requirements; approval is a decision for the authority, and we will not tell you otherwise.
What a typical project looks like
This is a typical process rather than a named client job. A homeowner extending a property needs an opening formed in an existing wall. We start with a site survey and detailed measurements, the in-house engineer works out the calculations, the drawings are produced and approved, and the beam is made, painted and either collected from Verwood or delivered to suit the build. Because the steel has to fit an existing structure, the measurement and design stages carry most of the weight. For some structural steelwork, same-day or next-day collection from the Verwood workshop may be available; confirm this when you place the order.
Common questions about structural design and calculations
Do you provide structural calculations for Building Control?
Yes. Structural design and calculations are provided by our in-house engineer to support Building Control requirements.
Can you work from my architect’s or structural engineer’s drawings?
Yes. We manufacture steelwork to your engineer’s approved drawings and calculations, or we produce the detailing and calculations ourselves where you need them.
Will the steel fit my existing structure?
Site surveys with total stations and traditional measurement record the actual conditions, and you approve the fabrication drawings before manufacture, so components are made to fit the structure as it is.
Do you take on small jobs like a single beam?
Yes. Our projects range from a single beam for a domestic extension to industrial-scale developments. See our steel beams and structural steelwork pages.
Can I collect the steel myself?
Same-day or next-day collection is available for some structural steelwork, and deliveries can be staggered to support your construction programme.
Can I get advice outside normal working hours?
Yes. Help and advice are available outside normal working hours where a project needs it. Our team brings over 25 years of industry experience, and the business has been established for over a decade.
How do I get a quote for structural design and calculations?
Send us your drawings, dimensions or project details and we will come back with a tailored quotation. Call TL Steelworks on 01202 285449 or 07938 826490, or use our contact page. TL Steelworks (Dorset) Ltd, Unit 2, Bessemer Close, Ebblake Industrial Estate, Verwood, Dorset BH31 6AZ.