TL Steelworks makes bespoke steel gates, railings and gate automation in our Verwood workshop and fits them across Poole. Every metal gate is drawn to your opening, then fabricated and painted in-house. Every project is quoted individually: call 01202 285449.
We work across Poole for homes and commercial sites. Our customers there are homeowners, builders, architects, developers and commercial clients. Our only premises are at Unit 2, Bessemer Close, Ebblake Industrial Estate, Verwood BH31 6AZ.

Which metal gates and railings do we make for Poole?
We make steel gates and railings to the opening and the job, from a single garden gate to every boundary on a development. Nothing comes from a catalogue. Each piece is drawn for the site, so it fits the posts, the levels and the look of the property.
| Type | Typical use in Poole |
|---|---|
| Driveway gates | Houses, often with a matching pedestrian gate |
| Garden and boundary railings | Front gardens, raised terraces and side boundaries |
| Development railings and gates | Apartment developments where every run must match |
| Commercial boundary gates | Offices, hospitality venues, commercial premises and industrial facilities |
| Automated gates | Driveways and sites that need controlled access |
Bring a sketch, a photo of a gate you like or an architect’s drawing. Because the gate is made to the property, it can pick up the lines of existing railings, balconies or other metalwork. Railings for balconies and stairs are part of our wider architectural metalwork in Poole.
Can you automate a steel gate?
Yes. We supply gate automation systems alongside the gates themselves, so the gate and the automation come from one supplier. The key is timing. The gate, posts, hinges and fixings must be designed for the automation system before fabrication starts.
That is why we ask about automation at the first call, even if you plan to add it in a year or two. Automation is cheapest to get right when it is planned at the start.
The automation is shown on the fabrication drawings you approve, and it appears as its own part of the quote. For a commercial site, tell us how the entrance is used and who needs access. For a house, tell us whether you want the driveway gate automated and the pedestrian gate left manual. Either way, the steelwork is drawn around the system rather than the system squeezed onto the steelwork.
Which finish stands up to Poole’s sea air?
The finish is chosen for where the gate will stand, and in Poole that usually means salt air. Moisture and salt attack any weak point in a coating. A gate facing the harbour needs more protection than one in a sheltered garden.
Coastal property owners need a material and coating specification suitable for a marine environment. Depending on the job, finishes include priming, powder coating (a baked-on coloured coating) or hot-dip galvanising (a zinc coating that protects steel from rust). Stainless steel fixings and hardware help where corrosion matters most.
Painting and protective finishing happen in the purpose-built painting facilities at our Verwood workshop. That makes the coating part of our quality control rather than an add-on. No external steel is free of upkeep: clean it and repair any damaged coating promptly. Our guide to which steel and finish suit outdoor and coastal steel explains the options.
How does a gate and railing job in Poole run?
A typical job runs from your first call to fitting, and you approve the drawings before any steel is cut. It starts when you call or send photos, the width of the opening and what you have in mind.
We then agree the brief: security, boundary or safety, automation, and the finish. Where needed, we survey with total stations (laser survey instruments) alongside traditional measurement. Sloping drives, uneven ground and post positions are recorded as they really are. Our draughtsmen produce 2D and 3D fabrication drawings in Tekla Structures and Advance Steel for your approval.
You then receive a tailored quote. We fabricate in our purpose-built workshops, paint in our own facilities and coordinate installation in Poole. For developers and contractors, deliveries can be staggered to suit the construction programme. Several gates across more than one site still means one point of contact, one set of drawings and one delivery schedule.
What affects the cost of a metal gate in Poole?
Every steel fabrication project is priced around its specific design, materials, engineering and installation requirements. Share your drawings or project details to receive a tailored quotation. We do not publish a price list for gates, because a garden gate and a commercial entrance share little except the steel.
The width and height of the opening matter first, because a bigger gate needs heavier posts and hinges. Design complexity comes next: plain vertical bars take less fabrication time than a detailed pattern. The amount of steel in the gate, posts and any matching railings follows.
Automation adds equipment and design work. The finish matters more near the coast. Delivery and installation depend on access and ground conditions. Our guide to steel gates prices explains each factor and what to send so your quote is accurate first time.
Where can I find gate design ideas?
Start with how the gate will be used, then the look. Many Poole houses need two openings: a wide one for cars and a narrow one for people. We design both together so the proportions and finish line up. Others want a new gate to match railings or balconies already on the house.
Commercial and development sites tend to put security and controlled access first, with every gate and run of railing matching across the scheme. Our article on metal gate design ideas for homes and sites covers these layouts. It also covers the hidden details that stop a gate sagging, such as post spacing.
Whatever you choose, you see it on 2D and 3D drawings and approve it before fabrication begins. That is where a design idea becomes a gate that fits your opening. If you want help choosing, send a photo of the entrance and we will suggest what suits it.
Who does the work
This page was prepared by the TL Steelworks Technical Team, structural steelwork and bespoke metal fabrication specialists. TL Steelworks has been an established business for over a decade. Our engineers, draughtsmen, fabrication workshops and painting facilities sit in one 15,000 sq ft building in Verwood.
Customers in Verwood can see our gates and railings in Verwood. Before you choose a supplier, read our guide to the mistakes that make gates and railings in Poole cost more than expected.
Steel gates and railings questions
Do you survey gate openings in Poole?
Yes, where the job needs it. We record post positions, openings and levels so the gate is made to the real site rather than a rough sketch.
Can a new gate match my existing railings?
Yes. Each gate is made to the property, not adapted from a standard product, so it can be drawn to match existing metalwork.
Do you fit the gates, or only make them?
Both. We fabricate and finish the gate and coordinate installation, so design, manufacture and fitting are handled by one team.
Do you take on a single gate?
Yes. We handle projects from a single item to industrial-scale developments, so one garden gate is worth our time.
Do you make metal gates for commercial sites in Poole?
Yes. We make boundary gates and railings for commercial premises, industrial facilities and apartment developments, as well as driveway gates for houses.
Get a quote for steel gates in Poole
Call 01202 285449 or 07938 826490, email tlsteels@outlook.com, or send photos and measurements through our contact page. Include the width of the opening, whether you want automation and how close the property is to the sea. The team at TL Steelworks will come back with a tailored quotation.