There is no standard price for a steel gate, because a bespoke gate is made to the opening, the property and the job it has to do. At TL Steelworks every gate is quoted individually: the price depends on the size and design, the amount of steel, whether automation is included, the protective finish, and delivery and installation. Share your drawings or project details to receive a tailored quotation.
By the TL Steelworks Technical Team – structural steelwork and bespoke metal fabrication specialists working from our Verwood workshop in Dorset.
If you are comparing steel gate prices, the useful question is not “what is the cheapest figure” but “what am I paying for, and what will it cost me later if it is done wrong”. This guide explains what goes into the price of a bespoke steel gate, which choices change it most, and what to send us so your quote is accurate first time.
How are steel gates priced?
Every steel fabrication project is priced around its specific design, materials, engineering and installation requirements. There is no price list, because a driveway gate for a house and a boundary gate for a commercial yard share almost nothing except the material. A tailored quote covers design, materials, fabrication, finishing and installation as applicable to your project.
What affects the price of a steel gate?
Six things move the price of a bespoke steel gate more than anything else. These are the points we establish in the brief and, where needed, at the site survey.
| Price factor | Why it matters |
|---|---|
| Size of the opening | A wider or taller gate needs more steel, stronger posts and heavier-duty hinges to carry its weight without dropping. |
| Design complexity | A simple frame with vertical bars takes less fabrication time than a gate built to a detailed architectural design or matched to existing railings. |
| Quantity and type of steel | How much steel goes into the gate, posts and any matching railings. |
| Automation | Gate automation systems add equipment and must be planned at the design and fabrication stage, not added afterwards. |
| Protective finish | Material and coating are specified for where the gate will live, which matters on coastal properties in Dorset and the south. |
| Delivery and installation | Access to the site, post positions and levels, and how installation is coordinated. |
Is a bespoke steel gate worth paying more than an off-the-shelf gate?
Often, yes, because the most expensive gate is the one that has to be fixed or replaced. Off-the-shelf gates frequently need altering to fit an opening, and the common faults – gates that sag after installation, misaligned hinges and locks, corrosion from inadequate coatings and incorrect post spacing – usually start before fabrication, with incomplete site measurements, unsuitable materials or poor installation.
A bespoke gate is made to your site measurements and your design. You can read more about the design mistakes that turn a gate into a long-term problem in our article on custom made steel gates in Dorset.
How does the finish change the cost of a steel gate?
The finish is chosen for the gate’s environment and use, not just its look, and that choice affects both the price now and the maintenance later. Tell us whether the gate faces a driveway, a garden or a commercial yard, and whether the property is near the coast, and the coating is specified to match.
Painting and protective finishing are done in-house in our purpose-built painting facilities, as part of controlling the quality of the job rather than as an add-on. For more on choosing materials and coatings for outdoor steel, see which steel and finish to use for outdoor and coastal steel.
Does adding gate automation increase the price?
Yes, automation adds to the cost, and it is cheapest to get right when it is planned at the start. The gate, posts and fixings need to be designed for the automation system before fabrication. TL Steelworks supplies gate automation systems alongside the gates themselves, so tell us at the first enquiry if you want an automated gate, even if you plan to add it later.
What is included in a TL Steelworks gate quote?
A tailored quote covers each stage of the project as it applies to you. This is our typical process:
- Enquiry – call us or send photos, dimensions and what you have in mind.
- Brief – we establish what the gate must do (security, boundary, safety), whether it is automated, and the finish you want.
- Site survey – where needed, measured with total stations alongside traditional methods, so post positions, openings and levels are recorded as they really are.
- Drawings – 2D and 3D fabrication drawings produced in Tekla Structures and Advance Steel and approved by you before manufacture.
- Quotation – a tailored quote covering design, materials, fabrication, finishing and installation as applicable.
- Fabrication and finishing – made and painted in our own workshops in Verwood.
- Installation – coordinated by our team.
Because the engineers, draughtsmen, fabrication workshops and painting facilities sit together in our 15,000 sq ft facility at Ebblake Industrial Estate, you deal with one supplier from the first drawing to installation.
How can I get an accurate steel gate quote quickly?
Send as much detail as you can with your first enquiry. It helps to include:
- The width of the opening, and the height you want.
- Photos of the entrance, posts and any existing walls or railings.
- Whether you want automation.
- The look you are after – a sketch, a photo of a gate you like, or an architect’s drawing.
- Whether the gate needs to match railings or other features on the property.
Steel gate price questions
Do you publish a price list for steel gates?
No. Every project is quoted individually, because size, design complexity, quantity of steel, automation, the finish, and delivery and installation all affect the figure.
Can you make a gate to my own design?
Yes. Our gates and railings are custom-built, and we can produce any design you require, whether you bring a sketch, a photo of something you like, or an architect’s drawing.
Do you install the gate, or do I need my own contractor?
We coordinate installation as well as fabricating, so design, manufacture and fitting are handled by one team.
Do you make gates for commercial premises?
Yes. We make boundary gates and railings for commercial premises, industrial facilities and apartment developments, as well as driveway gates for houses.
Which areas do you cover?
We work across Dorset, Hampshire and the wider south of England from our workshop in Verwood. See the towns and areas we cover.
Get a tailored quote for your steel gate
Call 01202 285449 or 07938 826490, email tlsteels@outlook.com, or send photos and measurements through our contact page. Read more about our bespoke gates and railings.



