TL Steelworks fabricates, delivers and installs steel beams for Bournemouth projects, from a single beam to a commercial building. Every beam is made to your engineer’s calculations at our 15,000 sq ft workshop in Verwood, and we cover Bournemouth postcodes BH1 to BH11. Call 01202 285449 for a tailored quote.
Steel beams for Bournemouth, made in Verwood
Our only workshop is at Unit 2, Bessemer Close, Ebblake Industrial Estate, Verwood, Dorset BH31 6AZ. Verwood is our only physical location, and Bournemouth is one of the priority towns we serve from it.
What Bournemouth customers get is one team under one roof. Our engineers, draughtsmen, fabrication workshops and painting facilities all sit at the Verwood site. A change to an end plate or a cleat position (the small steel brackets that connect members) is sorted in-house. It does not bounce between three suppliers.
That matters on Bournemouth refurbishment work, where the opening is rarely the size the old drawings assumed. Read how we make beams on our main steel beams page.
What Bournemouth steel beam jobs do we take on?
We handle everything from a single beam to industrial-scale developments. A small domestic job is worth our time, and it gets the same survey, drawings and care as a large one.
In Bournemouth, the work usually falls into four groups. Homeowners and self-builders need beams for extensions, loft conversions, renovations and load-bearing wall removals. Builders and main contractors need structural steel supplied and delivered to programme. Architects and structural engineers need a fabricator who works from their drawings or produces the detailing. Commercial clients, including hospitality venues, offices and apartment developments, need larger structural packages.
Opening up a living space often means removing a load-bearing wall. That takes out a structural element, and a correctly specified steel beam carries those loads instead. Every beam must be specified by a qualified structural engineer first.
Bournemouth beams and the coast
Steel near the Bournemouth seafront needs its protective coating chosen with care. Coastal property owners need a material and coating specification suitable for a marine environment.
An internal beam faces different conditions from exposed steel on a property facing the sea. So we choose material and protective coating for the environment and intended use, never on looks alone. Finishing is done in our own painting facilities in Verwood, so the coating is part of our quality control, not an add-on.
Tell us at the quoting stage if your beam will be external, partly exposed or close to the sea. The finish is then built into the quote from the start. If a beam needs galvanising (a zinc coating that protects steel from rust) or a paint system, we specify it before fabrication.
What approvals does a steel beam in Bournemouth need?
Removing or altering a load-bearing wall in Bournemouth needs Building Regulations approval. In Bournemouth, building control is handled by BCP Council, which covers Bournemouth, Christchurch and Poole.
That is different from our own base in Verwood, which sits in the Dorset Council area. It is a small point, but it catches out builders who work across the boundary. The application route and the inspection booking are not the same.
The structural rules are set out in Approved Document A of the Building Regulations. Your engineer’s calculations show the beam meets them, and our job is to fabricate to those calculations exactly. If you do not have calculations yet, our in-house engineer can produce structural design and calculations to support Building Control requirements.
How a Bournemouth steel beam job runs
A steel beam job runs in clear stages, and you approve the drawings before any steel is cut.
- Enquiry: call 01202 285449 or 07938 826490, or send drawings and dimensions through our contact page.
- Project brief: what the beam must carry, where it sits and the finish it needs.
- Site survey: where needed, we measure with total stations (electronic surveying instruments) alongside traditional methods, so the beam fits the real building.
- Drawings: fabrication drawings in Tekla Structures and Advance Steel, approved by you before manufacture.
- Calculations: from our in-house engineer where the work requires it.
- Quotation: a tailored quote covering design, materials, engineering, fabrication, finishing, delivery and installation as applicable.
- Fabrication and finishing in our Verwood workshops.
- Delivery to your Bournemouth site to suit your programme, with lifting by our spider crane where needed.
How much do steel beams in Bournemouth cost?
We do not publish fixed prices, because every beam is priced around its own design, materials, engineering and installation. Share your drawings or project details to receive a tailored quotation.
The price depends on the steel type and quantity and how complex the fabrication is. Engineering, calculations, a site survey, the protective finish, delivery and installation all count too.
Delivery is planned around your construction programme, and staggered deliveries are arranged where a build needs them. Same-day or next-day collection from Verwood may be available for some structural steelwork. Confirm it when you place the order.
Steel beam questions from Bournemouth
Do you cover my part of Bournemouth?
Yes, across Bournemouth postcodes BH1 to BH11, as well as Poole, Christchurch and the wider south. Call 01202 285449 to check your address.
Can you work from my engineer’s drawings?
Yes. We fabricate to your architect’s or structural engineer’s approved drawings and calculations, or we produce them ourselves.
Will the beam fit my existing house?
That is what the site survey and the approved drawings are for. The beam is measured and detailed against the actual building before any steel is cut.
Do you install, or just supply?
Both. We can deliver for your own builder to fit, or coordinate installation, with installation sequencing planned before manufacture.
More from TL Steelworks in and around Bournemouth
We have over 25 years of industry experience and over a decade as an established business. For nearby work, see steel beams in Poole and steel beams in Verwood. The full list is on our areas we cover page.
For wider steel fabrication in the town, see steel fabricators in Bournemouth, and for glass, our guide to glass balustrade cost in Dorset. To talk about your Bournemouth beam, call 01202 285449 or 07938 826490. The team at TL Steelworks will come back with a tailored quote.